If you are looking for China golden supplier and China good supplier cold applied waterproof black pp woven pipe mechanical protection tape, good quality and high quality cold applied waterproof black pp woven pipe mechanical protection tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd.

System Description

The GTC Coating System/cold applied waterproof black pp woven pipe mechanical protection tape is designed for the corrosion protection of new and existing pipelines. The coating layer consists of a tough, woven polypropylene backing with a high tack butyl rubber adhesive. An additional layer of POLYKEN 980 or 955 should also be used on pipes larger than 12" diameter to improve the soil stress resistance of the system.It is designed for the corrosion protection of new and existing pipelines. The coating layer consists of a tough, woven polypropylene backing with a high tack butyl rubber adhesive.

It’s also used for both metallic pipelines and waterproofing works against outdoor bad weathers .Anti corrosion adhesive tape can be used extensively in metal pipes of all pipelines and facilities in petroleum, natural gas, petrochemical industry, electric power, metallurgy, urban gas pipeline network and water supply etc. For efficient and long lasting outer anti corrosion.

Uses

Waterproofing-

-Waterproofing membrane for basements,sub structures and flat deck applications. plazas, bridge, vehicular traffic structures, or parking decks overlaid with an asphalt concrete wearing course.

-Tough, high performance waterproof membrane for critical substructures and civil engineering works.

-Provides a vapor and waterproof membrane to water excluding structures and protects concrete from attack by aggressive ground salts.

-Protection for wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline salt

Pipelines protection

_ Weld joints

_ Bends

_ Fittings

_ Bare pipe lengths

_ Pipe rehab and repair

_Bare pipe length

_Line travel pipelines

Structures

Backing :   a tough ,woven  polypropylene

Adhesive :  high tack butyl rubber adhesive

Interleaf: Anti-adhesive Film Treated with Silicone.

Features

_ Can be applied over a wide temperature range

_ Good conformability and consistent uniform thickness	

_ Heavy duty butyl bitumen compound adhesive ensures a strong bond & impervious seal.

_ Excellent adhesion to pipe and self

_ Flexibility provides extra protection at vulnerable areas

_ Compatible with common pipe coatings

_ Excellent resistance to cathodic disbonding

Technical Datas

PROPERPTIES	UNIT	TEST METHOD	TYPICAL VALUES
			POLYKENGTC 40	POLYKENGTC 50	POLYKENGTC 60	POLYKENGTC 65
Total thickness	mil	ASTM D 1000	40mils(1.0mm)	50mils(1.27mm)	60mils(1.52mm)	65mils(1.65mm)
Tensile Strength	Kg/cm	ASTM D 1000	35	35	35	35
Peel adhesion To primed pipe	Kg/cm	ASTM D 1000	25	28	30	34
To backing	Kg/cm	ASTM D 1000	20	25	26.5	28
Dielectric Strength	KV/mm	ASTM D 1000	20	23	26	30
Water Absorptivity	%	ASTM D 570	0.1	0.08	0.08	0.06

Ordering Information

POLYKEN GTC

Eg.: POLYKEN GTC 4"×50'

POLYKEN GTC	Product Model No.	Standard ordering options
50	Total tape thickness in mils	40mils(1.0mm),50mils(1.27mm),60mils(1.52mm),65mils(1.65mm)
4	Tape width in inches	2"(50mm),,4"(100mm),6"(150mm),
50	Tape roll length in feet	50ft(15M),100ft(30M)

Material Requirements

(Width of Coating in inches) ×(Area of pipe in square feet)*

----------------------------------------------------------------------------=Squares **of Coating 

Required

(Width of coating in inches-Overlap in inches) ×100

*Area of pipe in square feet=(Diameter in inches)/12×3.1416×(Length in feet)

**One square=One hundred square feet=9.29 square meters

(Width of Coating in mm) ×(Area of pipe in square meter)*

-------------------------------------------------------------------------------=Square meter of Coating Required

(Width of coating in mm-Overlap in mm)

*Area of pipe in square meter=(Diameter in mm)/1000×3.1416×(Length in meter)