Introduction

Switch Valve Manifold assembly has an isolation valve and balance valve with a flow meter, and after assembly, it can realize the setting of 2-8 circuits. Since the water separator generally needs to bear a large pressure, it is recommended that you pay attention to the material selection of the water separator when purchasing the water separator. Our products are made of selected brass, which not only has high strength but also can effectively avoid the adverse effects caused by rust. Its good corrosion resistance makes it difficult to breed impurities such as scale after a long time of use, and its work efficiency is higher. We can customize products of different specifications for you. Welcome to contact us.

Features

1. The valve body end adopts an R32 connector, and the outlet adopts R20 external thread.

2. The scale of the Switch Valve Manifold is 0.1-4 l/min, which can accurately adjust the water flow into a single pipe.

3. The integrated extrusion molding technology makes its main pipe have no joints and better toughness, and it is not easy to crack even when used at low temperatures.

4. The thickened pipe wall has better durability and is not easy to leak.

Pressure and Temperature Ratings:

88 psi at 140°F / 60°C

73 psi at 158° / 70°C

59 psi at 176°F/ 80°C

45 psi at 194°F / 90°C

http://www.winsoems.com/